Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 2-4 workdays
Available variants:
Prices incl. VAT plus shipping costs
Peaty´s HoldFast Trail Tool Wrap - Nightrider Black
Description
The Peaty's HoldFast Trail Tool Wrap is the ultimate flexible storage solution, designed to flexibly carry your trail essentials on any bike while keeping them clean and allowing quick access in emergencies on the trail.
Conventional frame bags slip, scratch the frame, make tools dirty and are cumbersome to use. The Peaty's Holdfast Trail Tool Wrap is made of an extremely durable, water-resistant fabric with welded seams to keep your tools from getting covered in mud or dust on even the wildest rides. There's even a fully waterproof internal pocket to keep small items and valuables safe and dry.
.The unique fastening system consists of two parts: the strap and the tool wrap. This allows the strap to be strapped tightly around the frame for the best possible fit. The bag is attached to the strap so that the tools are quickly at hand when needed.
.Once removed and opened, the bag can also be temporarily unhooked from the bike by sticking it back on the strap (which remains attached to the frame). So all tools remain clean and are quickly at hand.
.The flexible mounting system allows the belt to be attached anywhere and to any bike without being restricted by water bottle or accessory holders. There's plenty of room for an inner tube and some trail essentials, which are also included in your backpack for longer trips.
- No rattling, no slipping .
- Flexible transport of trail essentials on any bike .
- Water repellent material with durable welded seams keeps tools clean
- Waterproof zippered pocket keeps essentials dry
- Modular design for use with or without a spare tube .
- Unique strap attachment secures the bag firmly to the bike
- Reflective print for added visibility
- Quick access to tools for emergencies on the trail
What fits inside?
Just as the contents of a 30 liter backpack will not fit into a 5 liter enduro bag, the HoldFast Tool Wrap must be weighed against what will be carried. To find the best individual equipment should be a bit of trial and error - but will quickly have found the right setup.
.
The guys from Peaty's have tested the following equipment and found it to be good:
- 1x Holeshot Puncture Plugger .
- 1x Holeshot CO2 Tyre Inflator
- Either 1x or 2x 25G CO2 cartridges (depending on the size of the multitool)
- 1x Multitool (the smaller the better)
- 2x tire levers
- Either credit card, some coins or a bank note .
- Car or house keys
- Small cable ties
- Chain lock
Assembly instructions
.- Pack the items of your choice into the Tool Wrap and wrap it up with a little pressure to keep everything in place.
- Find the perfect place in your frame to attach the Tool Wrap. Our suggestion: under the top tube - but depending on frame size and suspension, you may find a better place.
- Clean the frame thoroughly at the point before attaching the strap. .
- Place the grippy rubber patch of the strap on the frame and pull the strap through the buckle.
- (Optional) If you want to carry a spare tube, place the folded tube between the strap and the frame.
- Tighten the strap and fasten it with the Velcro. The belt (and hose, if applicable) should now be tightly attached to the frame. .
- Now take the packed Tool Wrap and attach it to the bottom of the strap. .
- Finally, pull the strap tightly around the Tool Wrap and secure it at the Velcro closure.
GPSR contact person: Peaty's Products Ltd, Unit 1 Rhosddu Industrial Estate, GB LL11 4YL, Wrexham, verantw. Person in der EU: MRC Trading GmbH, Dr.-Noddack-Str. 16, DE 96135, Stegaurach, info@mrc-trading.de
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 2-4 workdays
Available variants:
Prices incl. VAT plus shipping costs
